Saramonic Microphone Adapter SmartRig+ for DSLR and Smartphone No. FE-189410

Saramonic Microphone Adapter SmartRig+ for DSLR and Smartphone

The SmartRig+ from Saramonic is a 2-channel sound adapter, with a total of 6 input ports:

• 2x XLR
• 2x 1/4” 6.35mm (for your guitar, etc.)
• 2x 3.5mm

The six input ports are spread out over two channels. Both channels feature 1x XLR, 1x 6.35mm and 1x 3.5mm. You can connect the SmartRig+ to you DSLR camera, GoPro or smartphone (iOS and Android) with the integrated 3.5mm cable. To listen to the sound, you can connect a headphone to the 3.5mm female port. There are two built-in rotary buttons to adjust the input volume.

Technical specs SmartRig+

The SmartRig+ can be powered with an 9V battery. On the bottom side of the SmartRig+ you will find an 1/4” female screw-thread, to mount him to a camera or tripod. With a button on the top of the SmartRig+, you can turn the 48v phantom power on and off. Because of this, you can use both dynamic and condenser microphones. You can switch between mono and stereo, with the button on the front side. 

Included:

• 1x SmartRig+ with integrated 3.5mm cable
• 1x Bag
• 1x Warranty card
• 1x Manual
• 1x Packaging

Artikelnummer:		189410
Merk:		Saramonic
Suitable for:		Single-lens reflex camera, Camcorder, Audio recorder
Dimensions (mm):		120 x 40 x 40
Gewicht:		130 g
Frequency:		20Hz to 20kHZ(+/-0.5dB)
Signal to Noise Ratio:		80 db @ 1kHz, -30 dBu input
Power supply:		9V Battery (not included in delivery)